17
ENA 5
1 CUP, the pre-set amount of water flows
into the cup, preparation stops automati-
cally.
READY
E It is also possible to prepare two cups of
pre-ground coffee. To this purpose place
two level measuring spoons of pre-ground
coffee into the filler funnel. Turn the Rotary
Switch to
2 CUPS and press to start
coffee preparation.
One-off setting before and during
preparation
The coffee strength can be changed before
preparation or during the grinding operation.
The following coffee strength options are possible
for 1 coffee:
Z Mild
Z Normal
Z Strong
E 2 coffees are always prepared with the
coffee strength ‘mild’.
E The pre-set amount of water can be
changed during the brewing operation by
turning the Rotary Switch.
One-off settings before and during coffee
preparation always follow this model. These
settings are not saved.
Example: Changing the coffee strength of
1 coffee before preparation from
NORMAL
to
STRONG.
Precondition:
READY appears on the display
and the coffee spout is set at the 1 cup position.
T Place the cup under the coffee spout.
g T Turn the Rotary Switch until STRONG is
displayed.
k T Press the Rotary Switch until STRONG is
displayed.
During grinding the coffee strength
STRONG is displayed.
1 CUP, the pre-set amount of water flows
into the cup, preparation stops automati-
cally.
READY
Entering a default setting for the amount of
water for a cup size
E A default setting can be entered for the
amount of water for 1 coffee. When
preparing 2 coffees this amount is
dispensed per cup.
Precondition:
READY appears on the display
and the coffee spout is set at the 1 cup position.
T Place the cup under the coffee spout.
k T Press the Rotary Switch and hold it down.
During grinding the strength of the coffee
is displayed.
k T Continue to hold the Rotary Switch down
until
ENOUGH COFFEE ? appears.
The coffee flows into the cup.
k T Press the Rotary Switch again when enough
coffee has been filled into the cup.
OK, the default setting for the amount of
water for one coffee has been entered.
READY
E This setting can be changed at any time by
repeating the above procedure.
Cappuccino with the Professional
Cappuccino Frother
Precondition: READY appears on the display
and the coffee spout is set to the 1 cup position.
T Remove the protective cover from the
Professional Cappuccino Frother.
T Connect the milk pipe to the nozzle.
T Insert the other end of the milk pipe into a
milk carton or connect it to a milk
container.
en
en
it
en
it
(35 stránky)
(29 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce