25
ENA 5
T Turn the coffee spout to the 1 cup or 2 cup
position.
Cleaning the machine – manually
The ‘Clean machine’ operation can be manually
initiated.
Precondition:
READY appears on the display.
T Open the cover behind the Rotary Switch.
P T Press the P button until RINSE appears.
k T Press the Rotary Switch to enter the
programme item.
RINSE
g T Turn the Rotary Switch until CLEAN is
displayed.
k T Press the Rotary Switch.
EMPTY TRAY
T Continue with the third prompt to take
action (indicated by
T), as described in the
section ‘Cleaning the machine following
a prompt’.
Descaling the machine following a prompt
The ENA builds up limescale deposits over time
and automatically prompts you to descale the
machine when necessary. The degree of build-up
depends on the hardness of the water.
J CAUTION
If the descaling agent comes into contact with the
skin or eyes, this can cause irritation.
T Avoid contact with the skin or eyes.
T Rinse the descaling agent off with clean
water. Should you get any descaling agent
in your eye, consult a doctor.
CAUTION
Risk of damage to the machine and residues in
the water if the wrong descaling agent is used.
T Only use original JURA care products.
CAUTION
Risk of damage to the machine if the descaling
operation is interrupted.
T Do not interrupt the descaling operation.
CAUTION
Risk of damage if the descaling agent comes into
contact with sensitive surfaces.
T Remove splashes immediately.
E The descaling programme lasts approx.
40 minutes.
E JURA descaling tablets are available from
stockists.
E If a CLARIS filter cartridge is used and
activated, you will not be prompted to
descale the machine.
Precondition:
DE-SCALE / READY is
displayed.
T Open the cover behind the Rotary Switch.
c T Press the maintenance button.
EMPTY TRAY
T Empty the coffee grounds container and
drip tray and replace.
AGENT IN TANK
T Remove and empty the water tank.
T Completely dissolve the contents of one
blister (3 JURA descaling tablets) in a
container holding 500 ml of water. This
may take several minutes.
T Fill the solution into the empty water tank
and replace the tank.
OPEN TAP
T Carefully remove the nozzle from the
Connector System
©
.
en
en
it
en
it
(35 stránky)
(29 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce